CDINDUSTRY(INTERNATIONAL).INC
CDINDUSTRY(INTERNATIONAL).INC
Add to Cart
Gasket Titanium Plate Heat Exchanger Customized Service
Plate heat exchanger Classification
All-welded plate heat exchanger is a kind of plate type heat exchangers that can endure high temperature and high pressure. Highest temperature 400°C, pressure 3.5Mpa. Relying on application practices, Fully welded plate heat exchangers are applied in oil and gas industry, refinery applications, pharmaceutical industry, chemical/petrochemical industry.
Performance features
1. Unequal section design for heating and air conditioning
2. Compression molding technology
3. Hanging point design
Parameter
| Plate heat exchanger | ||
| Material | Contact with the product parts | SS304,SS316L,SS316 |
| Non contact product parts | SS304 | |
| Sealing material | Standard | NBR or EPDM, silicone |
| Pressure | Working pressure | 0~6bar |
| Temperature | Working temperature | -10~+150°C |
| Sterilization temperature | 150°C≤30min | |
| Connection | UNION,Flange | |
| Exchanger type | Heating or Cooling | |
| One Plate exchanger area | 0.02m2,0.04m2,0.06m2,0.08m2,0.15m2,0.24m2,0.65m2,0.85m2,1.54m2,1.8m2 | |
| Plate thickness | 0.7-1.0mm | |
| Flow | 0-1000T | |
| Specification | 1 square meter -60 square meter | |
Plate heat exchanger design:
(1) Physical parameters of cold and hot media, such as pH, chloride content, viscosity, density, thermal conductivity, specific heat, etc.
(2) The inlet and outlet temperatures of cold and hot media.
(3) Flow of cold or hot medium or flow of one of them.
(4) Cold and hot medium pressure loss requirements.
(5) Intrinsic characteristics of plate heat exchangers, such as plate material, seal gasket material, etc
FAQ
Q: What about the warranty?
A: We provide 1 year warranty and maintenance
Q: How is the installation?
A: We provide relevant materials for installation, commissioning and training.
Q: What about the delivery time?
A: 5-10 working days for a single machine, 30-40 working days.