CDINDUSTRY(INTERNATIONAL).INC
CDINDUSTRY(INTERNATIONAL).INC
Add to Cart
Safety valve Lubrication Valve AQF-25 of thin oil station
Main Parameters
| form | Spring type |
| displacement | DN |
| Drive mode | oil pressure |
| Valve action | security |
| Mode of action | Single action |
| Type (channel position) | right-angle |
| Function Over | flow type |
| sealing material | Direct machining of valve body |
| Sealing method | Hard seal |
| Pressure environment | low pressure |
| Temperature environment | low temperature |
| Flow direction | one-way |
Product Introduction
The safety valve AQF-25 of the thin oil station is applicable to the thin oil lubrication system with the working pressure of 0.5MPa and 0.8MPa. After the overflow pressure is set, the pressure of the system will not be overloaded, so as to ensure the safety of the system. The viscosity grade of the working medium is N22~N460. For small diameters (DN ≤ 40), the pressure is adjusted by adjusting bolts. For larger diameters (DN50~100), the pressure is adjusted by hand wheels.
Overview:
The safety valve of the thin oil station is applicable to the thin oil circulating lubrication system. Its working medium is turbine oil, 20~25 # machine oil and steel rolling oil, and its kinematic viscosity grade is N22~N460 (equivalent to ISO VG22~VG460).
Parameters of safety valve:
AQF type safety valve is applicable to thin oil lubrication system with working pressure of 0.5MPa and 0.8MPa. After setting the overflow pressure, the pressure of the system will not be overloaded, so as to ensure the safety of system operation. The viscosity grade applicable to working medium is N22~N460. For small diameter (DN ≤ 40), the pressure is adjusted by adjusting bolts, and for larger diameter (DN50~100), the pressure is adjusted by hand wheel.
