CDINDUSTRY(INTERNATIONAL).INC
CDINDUSTRY(INTERNATIONAL).INC
Add to Cart
2.5MCY14-1B High/Low Lubrication Station 5.5 KW 1440RPM GXYZ-A2.5/250
Structure and working principle
The thin oil station is composed of oil tank, oil pump device, filter (dual cylinder mesh filter and magnetic filter), shell and tube oil cooler, electric control box, instrument panel, pipeline, valve and so on. When working, the oil is sucked out from the oil tank by the gear pump, and sent directly to the lubricating part of the equipment through the one-way valve, the double-tube mesh oil filter, and the tubular oil cooler, so that the relative moving parts are lubricated and brought The metal particles worn during the movement pass through the magnetic filter to remove the magnetic iron filings and abrasives, and return to the oil tank to form a thin oil circulation lubrication system. The maximum working pressure of the oil station is 0.4MPa, and the minimum working pressure is 0.15MPa. According to the requirements of the lubricating parts, the working pressure is determined by adjusting the safety valve. When the working pressure of the oil station exceeds the setting pressure of the safety valve, the safety valve will automatically open, and the excess oil will flow back to the oil tank.
Technical Details
| Parameters | Type | GXYZ-A2.5/16 | GXYZ-A2.5/25 | GXYZ-A2.5/40 | GXYZ-A2.5/63 | GXYZ-A2.5/100 | GXYZ-A2.5/125 | |
| low pressure system | Pump unit model | LBZ-16 | LBZ-25 | LBZ-40 | LBZ-63 | LBZ-100 | LBZ-125 | |
| Flow | 16L/min | 25L/min | 40L/min | 63L/min | 100L/min | 125L/min | ||
| Oil supply pressure | ≤0.4 MPa | |||||||
| Oil supply temperature | 40±3℃ | |||||||
| Motor | Model | Y90S-4,V1 | Y100S-4,V1 | Y112S-4,V1 | ||||
| Power | 1.1 KW | 2.2 KW | 4 KW | |||||
| Speed | 1450 r/min | 1440 r/min | 1440 r/min | |||||
| Fuel tank capacity m3 | 0.8 | 1.2 | 1.6 | |||||
| High pressure system | Pump unit model | 2.5MCY14-1B | ||||||
| Flow | 2.5 L/min | |||||||
| Oil supply pressure | 31.5 MPa | |||||||
| Motor | Model | Y112M-6 B35 | ||||||
| Power | 2.2 Kw | |||||||
| Speed | 940 r/min | |||||||
| Filtration accuracy m2 | 0.08~0.12 | |||||||
| Filter Area m2 | 3 | 5 | 7 | |||||
| Cooling Area m2 | 1 | 1.5 | 3.6 | 5.7 | 9 | 11.25 | ||
| Electric heating power Kw | 3 x 4 | 3 x 4 | 6 x 4 | |||||
| Dimension (mm) | 1820 x 1130 x 1320 | 1880 x 1220 x 1650 | 2180 x 1550 x 1850 | |||||
| Notes | All filter switching pressure difference is 0.15MPa | |||||||
Maintenance and Safety
1. The shaft sealing ring of the gear oil pump should be inspected frequently. If there is oil leakage or damage, it should be replaced immediately.
2. The shell and tube oil cooler must be inspected and cleaned every 5 to 10 months according to the water quality.
3. The double-tube mesh cooler should be cleaned every three months to remove the dirt accumulated in the oil and replaced according to the sealing condition.
4. The magnetic filter is cleaned every three months.
5. Pay attention to check the lowest oil level in the fuel tank. If water is found, open the valve at the lower part of the fuel tank to drain the water.
6. The components of the electric control box are damaged and should be replaced in time.
7. If there is any leakage of the oil system components, it should be dealt with in time.