CDINDUSTRY(INTERNATIONAL).INC
CDINDUSTRY(INTERNATIONAL).INC
Add to Cart
Energy Saving Compressor Lubrication System XYZ-400G 400L/Min Motor Y132M-4 7.5KW
Technical Details
| Model | XYZ- 6G | XYZ-10G | XYZ-16G | XYZ-25G | XYZ-40G | XYZ-63G | XYZ-100G | XYZ-125G | XYZ-250G | XYZ-400G | XYZ-630G | XYZ-1000G | |
| Oil supply pressure | 0.4 Mpa | ||||||||||||
| Nominal flow(L/min) | 6 | 10 | 16 | 25 | 40 | 63 | 100 | 125 | 250 | 400 | 630 | 1000 | |
| supply temperature | 40 ±3℃ | ||||||||||||
| Tank Capacity | 0.15 | 0.63 | 1 | 1.6 | 6.3 | 10 | 16 | 25 | |||||
| Filter area | 0.05 | 0.13 | 0.19 | 0.4 | 0.52 | 0.83 | 1.31 | 2.2 | |||||
| Heat transfer area | 0.6 | 3 | 4 | 6 | 24 | 35 | 50 | 80 | |||||
| Cooling water consumption | 0.36 | 0.6 | 1 | 1.5 | 3.6 | 5.7 | 9 | 11.25 | 12-22.5 | 20-36 | 30-56 | 60-90 | |
| Heater | Power(kW) | 2 | 12 | 18 | 24 | 1 | / | 1 | / | ||||
| Voltage(V) | 220 | ||||||||||||
| Steam Consumption(kg/h) | / | / | / | / | 100 | 160 | 250 | 400 | |||||
| Motor | Type | JW7124-B5 | Y90S-4-B5 | Y100L-4-B5 | Y112M-4-B5 | Y132S-4 | Y132M-4 | Y160L-4 | Y180L-4 | ||||
| Power (kW) | 0.55 | 1.1 | 2.2 | 4 | 5.5 | 7.5 | 15 | 22 | |||||
| Speed (r/min) | 1400 | 1400 | 1430 | 1440 | 1440 | 1440 | 1460 | 1470 | |||||
| Weight (kg) | 308 | 309 | 628 | 629 | 840 | 842 | 1260 | 1262 | 3980 | 5418 | 8750 | 12096 | |
Design concept
Low speed, heavy load design, effectively guarantee the service life of wearing parts, at the same time, low noise and low vibration.
Small pressure ratio design, and accurate control of inlet and outlet pressure and exhaust temperature at all levels, the machine will be forced to stop when the temperature is abnormal during operation, further ensuring the safety of use. The pipeline valve has a large diameter and a low flow rate design; further ensuring performance and safety.
Company purpose:
Zcer lubrication, integrity-based, quality first, customer first.
Quality policy:
Full participation, law-abiding, continuous improvement
Scientific management, quality assurance, customer satisfaction
Quality objectives: a. The pass rate of the first inspection of the product reaches 98%